Specifications for TD-AS1681 | AS1681 Drying Ovens

Dimensions

	TD-150F-AS1681
Temperature Range	Ambient +10°C to 200°C
Temperature Uniformity	+/-2°C @ 100°C
Heater Power	900 watts
Electrical	5A/230V
Nominal Capacity	150L
Porthole Diameter	No porthole allowed
Weight	120kg
As per the guidelines in Australian Standard AS1681-2002, these ovens have an internal purge timer factory set to provide a preventilation perod of not less than four changes of fresh air (vents at minimum position) prior to heating elements operating, either initially, upon opening the door or after accidental shutdown.
Minimum Purge Rate (L/min)	106
Minimum Purge Rate (L/min)	232
Note: It is the operators responsibility to ensure the flow rate is adequate for the volume and type of solvent introduced into this oven. Refer to Australian Standard AS1681-2002.

	TD-150F-AS1681
Over Temperature Safety	✔
Over Current Protection	✔
Explosion Vent Port	✔
Automatic Purge Timer	✔
Safety Air Flow Sensor	✔
Fibreglass Insulation	✔
The air flow sensor will detect the following events and shut down the oven: • A value lower than 5pa indicates that an air circulating fan may have failed. • A value Higher than 45pa indicates that there may be a restriction to flow or blockage in the inlet or the outlet ports. In both cases above the oven would not be capable of purging four volumes of air, therefore a volatile condition may exist and the oven is shut down.

	TD-150F-AS1681
BMS Plug	No volt contact closure plug and socket connection to a Building Management System
Additional Shelves	Additional Stainless Steel shelves to suit